Shop hard to find auto parts, high-end electrician tools, specialty auto-shop supplies and forestry tools at affordable pricing with FREE Selected Shipping. At Tillman Tools, we specialize in 09843-18040, sst 09843-18040, 9843, sst 09843–18040, toyota sst 09843-18040 for over 50 years. Find vehicle-specific tools, as well as DIY, boutique hand tools, specialty motorcycle tools to get the job done right.
And now we are talking about how to Disable VSC Easily, Safely, and Un-Doable?
I decided to write this post about how to get "VSC OFF" without having to do any actual hardware mods to the ECU or wiring.
FYI-Not responsible for anything that goes wrong. Also any terms or info unclear in my write up, I will post this text that can be referenced.I will also be attaching the diagram that walks thru how to do a Zero Point Calibration, but you can reference just to see which ports to plug the wires to. I highly suggest reading over this post first, as it will give you a clear understanding of what you are doing.
Ok, that said here are the steps:
1. Ensure the shift lever is in
2. Turn the ignition switch ON.
3. Using SST 09843–18040 (Which is that homemade tool, for mine I just used speaker wire) repeat a cycle of short and open between terminals Ts and CG -Basically after having the end of the wire plugged into ports #14 and #4, using the other end, simply touch the wires together 4-8 times within 8 seconds.
4.Verify that the VSC indicator light is lit indicating