If your printer printing blank pages then here is the list of possible cause that you can check
Ink or toner cartridges that have become dislocated from their proper place.
The loaded paper size in the input tray is not correct.
5 simple ways to fix it:
Check ink cartridges.
Run the Windows printer troubleshooter.
Update the printer driver.
Download and run HP Print and Scan Doctor.
Configure Print Spooler service.
Assuming you can't do it all alone, you can interface with us, we have a specialist group with us that can fix every one of your issues in only one call.
Hello everyone, I want to recommend an excellent outdoor advertising company! I'm happy with the print and the quality of the work! W this site https://bannerprintinglosangeles.com/ I think you will definitely like it, I was satisfied
Fix # 1 - Restart your Printer
For most devices, a simple reset can sometimes resolve common mechanical or operational problems. Thus, it makes sense to try the most straightforward answer first and find out if it works. Reset your printer using these steps:
Press your printer’s Power button and wait for the device to shut down entirely.
Disconnect the Power cord from the electrical outlet. Wait for about 3 minutes and then reconnect the Power cord back into the outlet.
Push its Power button to turn on the device. Conduct a test print and see if printouts are back to normal.
Fix # 2 – Resolve Ink / Toner Cartridges Problems
If there are issues with the ink cartridges, your printer won’t be able to generate regular printouts. Follow the steps below to make sure that your cartridges are fully operational and in good condition:
Check the Toner / Ink Levels to find out whether or not there’s sufficient ink left. If there’s isn’t enough left on the tank, you’ll have to replace the empty cartridges with fresh ones.
Take out the Ink Cartridges and check for any damages. If you discover faulty units, replace them with new ones as soon as possible.
Make sure that each cartridge is installed correctly. Remove the ink tanks and reinstall them properly, one by one. Make sure that every unit locks firmly into place.